Jigsaw Blades

Product Details :

'T'-Shank - Fits 90% of all current jigsaw makes and models including Bosch, DeWalt, Hitachi, Kobe, Makita and Osaki. Supplied in a tough plastic storage case. Assortment contains one of each of the most popular wood cutting blades: Clean cut wood blades: T101AO - T101B - T101BR - T101AOF - T101BF - T101BRF Speed cut wood blades: T144D - T244D Speed cut hardwood blades: T144DF Precision cut wood blades: T144DP T101AO: Carbon Steel. For curved cutting and right angled cutting. Hardwood, softwood, plywood, laminated chipboard & plastic <25mm. Pointed ground teeth. 50mm cut length. 1.35mm pitch T101AOF: Carbon Steel. Curve cutting blade, no tears. Hardwood, plywood, laminated boards/HPL (1.5 - 15mm). Pointed taper ground teeth. 57mm cut length. 1.4mm pitch T101B: Carbon Steel. Clean cutting. Hardwood, softwood, plywood, blockboard & plastic <25mm. Taper ground teeth. 75mm cut length. 2.5mm pitch T101BF: Flexible Back Bi-Metal. Plywood, laminated fibre wood board, plastics <30mm, blockboard & glass fibre reinforced plastic <15mm. Taper ground teeth. 75mm cut length. 2.5mm pitch T101BR: Carbon Steel. Splinter-free cuts (down cutting teeth). Hardwood, softwood, plywood, laminated chipboard, plastic. Taper ground teeth. 75mm cut length. 2.5mm pitch T101BRF: Flexible Back Bi-Metal. Splinter-free cuts (down cutting teeth). For hardwood, laminates, laminated panels 3-30 mm, kitchen worktops <45 mm. Taper ground teeth. 100mm. 2.5mm pitch T144D: Carbon Steel. Quick cutting. Hardwood, softwood & chipboard <60mm. Side set & ground. 75mm cut length. 4mm pitch T244D: Carbon Steel. Curve cutting blade. Hardwood, softwood & chipboard <60mm. Side set & ground. 75mm cut length. 4mm pitch T144DF: Flexible Back Bi-Metal. For straight & curved cutting in blockboard, chipboard, hard & soft woods, woods with nails 6 - 60mm. Side set & ground. 75mm cut length. 4mm pitch T144DP: Carbon Steel. Softwood, chipboard, wood core plywood, fibre boards 5 - 50mm, doors & worktops <50mm. Ground edge. 74mm cut length. 4mm pitch (Gergaji)

Product Details :

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate, reducing the gap around the blade and the splinter area. Another technique is to score a guide line on the wood. This creates a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line. This holds the material in place whilst the cut is being made. The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user. HSS - Heavy-Duty (Pack 20)  (Gergaji)